My Vehicle Select a Vehicle

Trailer Light Power Module

Part No 119190
  • The unit is rated for up to 4.2 amps for Turns/Stops circuits and 7.5 amps for the Taillight circuit
  • Universal ModuLite designed to be used on most vehicles plus the hard to wire vehicles
  • Draws power directly from the vehicle battery and uses less than 5mA of the vehicle circuit for sensing to turn the trailer functions on and off
  • Will work with either LED/Incandescent bulbs (vehicle & trailer)
  • Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
  • Designed not to send feedback thru the vehicle circuits
  • The trailer brakes will override the hazard lamps when the brake is activated
  • Advanced circuitry works in all standard applications as well as vehicles with ST and STT pulse width modulation (PWM) systems
  • Interprets/decodes multiplex signal inputs (i.e. Audi, BMW, Mercedes and VW)
  • Will not work with vehicles with low-side switch
  • Can be used on a 2 wire or 3 wire system
  • All solid-state components in potted encapsulation
  • Includes integrated protective cover
Brand: Tekonsha
Part Number: 119190
Warranty: Limited 1 Year Warranty
UPC: 016118070767
Dimensions: 3.98" x 3.88" x 8.88" (Shipping)
Weight: 0.95 lbs

When used together, the following parts make up the product (Kit) at the top of the page. They can be purchased together as part of the kit or as separate components for replacement or repair; however, ALL of the following MUST be used in order for the above product to work as advertised.

Tool Sizes Needed
Drill --
Drill Bits 3/32"
Ratchet --
Screwdriver #2 Philips
Sockets set
Test Light --
Wire Crimpers --
Wire Cutters --
This product is not vehicle specific.
There are currently no frequently asked question for the Trailer Light Power Module.
If you would like to submit your question, please use our contact page.