 |
|
|
|
|
|
|
|
| |
Bench Tester
|
|
Test device designed to determine if a brake control is working properly. Checks brake control output, independent of vehicle wiring. Simulates many fault conditions including open ground, short circuit, open load and more. |
|
| Part No. |
|
Description |
|
| 7585 |
|
Tekonsha Bench Tester |
|
| |
Current Monitor
|
|
Testing device designed to assist in determining whether a tow vehicle’s trailer connector has been wired properly. Excellent diagnostic tool for installation, setup and troubleshooting of electric trailer brake controls. Used to level and pre-set brake control when trailer is not available. |
|
| Part No. |
|
Description |
|
| 6565 |
|
Tekonsha Current Monitor |
|
| |
Emulator
|
|
7-Way Trailer Emulator is used for the proper installation and set-up of a brake control when a trailer is not readily available. Brake control set-up is accomplished using a built-in load module that will simulate electric magnet brakes on a trailer. (The emulator will also check electrical continuity of all circuits in the 7-Way blade style connector.) |
|
| Part No. |
|
Description |
|
| 6562 |
|
7-Way Trailer Emulator |
|
| |
Trailer Tester
|
|
The Trailer Tester is designed to help you quickly identify problems in the wiring of the trailer. This is done by testing the Left Turn, Right Turn, Tail/Marker, Brake and Back Up circuits on the trailer. The tester indicates approximate amount of current in each circuit. It will also test the voltage of the external battery connected to the trailer charge circuit (i.e. trailer battery). |
|
| Part No. |
|
Description |
|
| 8010 |
|
Trailer Tester |
|
|
|
|
